Operating sequence, Washing, Load the laundry – Zanussi WD 15 User Manual

Page 11: Measure out the detergent, Add the fabric softener, if required, Switch the machine on

Advertising
background image

WASHING

Before your first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.

1. Load the laundry

Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent recommended by
the manufacturer in a graduated cup and pour it into the
main wash compartment

.

If you wish to carry out the prewash or soak
programme, pour detergent into the compartment
marked .

3. Add the fabric softener, if

required

If required, pour fabric softener into the compartment
marked

(the amount used must not exceed the

«MAX» mark in the drawer).
Push the detergent drawer back in.

4. Switch the machine on

Press the ON/OFF button to switch the machine on;
three flashing dashes are displayed.

11

Operating Sequence

P0404

P0223

P0226

ON - OFF

CANCEL

TIME TO FINISH

Advertising