ZETA Music Systems XB-306 - Manual (Page 3)

Owner's Manual 3
Zeta Music
INTRODUCTION
Congratulations on your purchase of the Rob Wasserman Signature 6-string Cross-Over
Bass. Zeta’s Cross-Over Series instruments are designed to give the bass player the
ability to successfully produce the sound of an acoustic bass whether playing in a
strapped-on bass guitar position, or when played in an upright position on the endpin or
tripod stand. The Cross-Over is made from lightweight alder tonewoods and is designed
to be comfortable to play with the ergonomic chest brace. To properly maintain and
familiarize yourself with your instrument, please read this owner's manual completely.
Please Note: Keep this manual in a safe location for future reference.
Warranty: Visit
www.ZetaMusic.com to register your warranty online; or, fill out your
warranty card.
PERFORMANCE APPLICATIONS
The Cross-Over™ Bass provides the best of both worlds – the smooth sound of a
fretless bass guitar, and the easily accessible feel of an upright bass. To play as a bass
guitar, simply place a standard guitar strap on the strap pins on the back of the Cross-
Over™ Bass. Upright style playing can be accomplished on either the Telescoping
Endpin or the ZOS-5 Tripod Stand. The arched fingerboard of the Cross-Over™ Bass
allows for both pizzicato style playing (with your fingers), as well as arco style playing
(with a bow – in this case, a cello bow works best).
CONTROL FUNCTIONS
VOLUME KNOB Controls the volume of the instrument signal output. This knob
is located closest to the bridge, near the center of the
instrument.
TREBLE
This is a 12dB treble boost/cut, located in the center position of
the three controls.
BASS
This is a 12dB bass boost/cut, located closest to the edge of the
instrument.
LINE OUT
A powered balanced ¼” mono-output jack. The volume knob
determines the output level of this jack. Use a standard "guitar"
¼” cord.
PICKUP SYSTEM