ZyXEL Communications P-335 Plus - Manual (Page 4)

ENGLISH
4
1 Hardware Connections
Do the following hardware connections for initial setup.
WAN Connection
Connect your modem to the “WAN” port using the cable that came with your modem.
LAN Connection
Connect your computer to a "LAN" port using the included Ethernet cable.
USB Connection
Use a USB cable to connect a USB printer to this port. The P-335 Plus automatically detects the
model of the USB printer.
POWER Connection
Use the included power adaptor to connect the POWER socket to an appropriate power source.
The LEDs
Look at the top panel LEDs. When you
connect the power, the PWR LED blinks and
stays on once the device is ready.
The LAN and WAN LEDs turn on if the
corresponding connections are properly made.
1
2
3
4