Cautions, Connections – Yamaha YST-MSW10 User Manual
Page 6
Thank you for purchasing a Yamaha YST-MSW10 Subwoofer System. Yamaha’s Active Servo Technology offers
exceptional high performance.
Cautions
Please read the following operating precautions before use:
•
When disconnecting the power cord from an AC receptacle, hold
and pull the plug, not the cord.
•
If the YST-MSW10 is not going to be used for a while, disconnect
it from the AC receptacle.
•
Since this unit has a built-in power amplifier, heat will radiate from
the rear panel. Therefore, place the unit at least 10 cm (4 inches)
away from the wall. Also, do not position with the rear panel
facing down on the floor or other surface.
•
Always disconnect from the AC receptacle before making any
connections.
•
YST-MSW10 does not contain any user serviceable parts. Refer all
servicing to your Yamaha dealer.
•
Do not expose the YST-MSW10 to temperature extremes, direct
sunlight, excessive dust, humidity, or vibration.
•
Site the YST-MSW10 on a level, stable surface. Do not drop the
YST-MSW10, apply excessive force to its controls, or put heavy
items on top of it.
•
If the YST-MSW10 should require cleaning, use a soft cloth. If
necessary, a damp cloth.
•
Do not to put some objects into it. If doing so, the sound will be
unnatural or it may cause damage to the speaker and/or amplifier.
•
To protect the YST-MSW10 speaker, avoid microphone feedback,
continuous and excessive output from electronic musical
instruments, excessive signal distortion,
3
Connections
Refer to page 1 for system connections.
Rear Panel
(Refer to page 2)
1
LINE 1 IN: This 3.5 mm stereo jack connection is for inputting
line-level signals to the YST-MSW10.
2
LINE 1 OUT: This connection can be used to feed the input signal
to other equipment.
3
LINE 2: These RCA-pin jacks are for inputting speaker level
signals to the YST-MSW10. They can be connected directly to the
speaker outputs of a stereo amplifier.
•
Although the YST-MSW10 is magnetically shielded, keep floppy
disks and tapes away from it.
•
The YST-MSW10 may cause picture distortion when sited close to
a television or computer monitor. In this case, move it away a little.