ZyXEL Communications P-661H Series User Manual

Page 50

Advertising
background image

P-661H/HW Series User’s Guide

50

Chapter 2 Introducing the Web Configurator

VPN

Setup

Use this screen to configure each VPN tunnel.

Monitor

Use this screen to look at the current status of each VPN

tunnel.

VPN Global

Setting

Use this screen to allow NetBIOS traffic through VPN tunnels.

Advanced

Static Route

Use this screen to configure IP static routes.

Bandwidth

MGMT

Summary

Use this screen to enable bandwidth management on an

interface.

Rule Setup

Use this screen to define a bandwidth rule.

Monitor

Use this screen to view the ZyXEL Device’s bandwidth usage

and allotments.

Dynamic DNS

Use this screen to set up dynamic DNS.

Remote MGMT

WWW

Use this screen to configure through which interface(s) and

from which IP address(es) users can use HTTPS or HTTP to

manage the ZyXEL Device.

Telnet

Use this screen to configure through which interface(s) and

from which IP address(es) users can use Telnet to manage the

ZyXEL Device.

FTP

Use this screen to configure through which interface(s) and

from which IP address(es) users can use FTP to access the

ZyXEL Device.

SNMP

Use this screen to configure your ZyXEL Device’s settings for

Simple Network Management Protocol management.

DNS

Use this screen to configure through which interface(s) and

from which IP address(es) users can send DNS queries to the

ZyXEL Device.

ICMP

Use this screen to change your anti probing settings.

UPnP

Use this screen to enable UPnP on the ZyXEL Device.

Maintenance

System

General

This screen contains administrative and system-related

information and also allows you to change your password.

Time Setting

Use this screen to change your ZyXEL Device’s time and date.

Logs

View Log

Use this screen to view the logs for the categories that you

selected.

Log Settings

Use this screen to change your ZyXEL Device’s log settings.

Tools

Firmware

Use this screen to upload firmware to your ZyXEL Device.

Configuration

Use this screen to backup and restore the configuration or reset

the factory defaults to your ZyXEL Device.

Restart

This screen allows you to reboot the ZyXEL Device without

turning the power off.

Diagnostic

General

These screens display information to help you identify problems

with the ZyXEL Device general connection.

DSL Line

These screens display information to help you identify problems

with the DSL line.

Table 3 Web Configurator Screens Summary (continued)

LINK/ICON

SUB-LINK

FUNCTION

Advertising
This manual is related to the following products: