Zanussi FLS 1084 - Manual (Page 19)

19
If after all these checks, the problem persists, contact
your local Service Force Centre, quoting the model and
serial number. This information can be found on the
rating plate (see picture).
Please note that it will be necessary to provide proof of
purchase for any in-guarantee service calls. In-guarantee
customers should ensure that the above checks have
been made as the engineer will make a charge if the
fault is not a mechanical or electrical breakdown.
Service and
Spare Parts
If you require an engineer or assistance with your
appliance, please call our customer care department:
0990 929929
This product should be serviced by an authorised
Service engineer, and only genuine spare parts
should be used.
Under no circumstances should you attempt to
repair the machine yourself. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local
Service Force Centre. Always insist on genuine
spare parts.
Mod. ..........
Prod. No. ...........
Ser. No. .........
Mod.
.......... Ser.
P0042
Symptom
The door will not open
Possible causes
■ The programme is still running.
■ The door lock has not yet released (door pilot light on).
■ Water in the tub: the door cannot be opened if water is present in the
tub.
Spinning starts late or the machine
does not spin ■ The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after 10 minutes, the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case, redistribute the load
manually and reselect the spin programme.
The machine makes an unusual
noise ■ The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures a
softer start and more even distribution of the laundry in the drum when
spinning, as well as increased stability of the machine.
No water is visible in the drum ■ Machines based on modern technology operate very economically
using very little water without affecting performance.