Zanussi ZWF 1432 S - Manual (Page 10)

10
7. Select the spin speed or the
Rinse Hold option
Press the “Spin” button repeatedly, in order to select the
desired spin speed or the “Rinse Hold” option. The
relevant light will light up.
If you select the Rinse Hold option, the machine will
stop at the end of the programme with the water still in
the tub.
ZWF 1432 W - S ZWF 1632 W
8. Select the desired options
If your laundry is heavily soiled, it may be advisable to
select the “Prewash” option.
If your laundry is lightly or normally soiled and it is
necessary to prolong the washing time, select the
“40°AA” option.
The relevant light illuminates.
Prewash
Half
Load
40° AA
Spin
1600
1200
900
700
Rinse Hold
Spin
1400
900
700
500
Rinse Hold
9. Start the programme
Press the “Start/Pause” button. The relevant light will
stop flashing and only the light relevant to the phase that
is in progress will remain lit.
10. How to change an option or
a programme during its cycle
Before you make any change, you must pause the
machine by pressing the “Start/Pause” button.
It is possible to change the temperature or any option
before the programme carries it out.
Changing a running programme is possible only by
cancelling it and selecting a new programme.
The machine will resume the cycle from the beginning
and the washing water in the tub will not empty out.
If it is necessary to drain the water, proceed as follows:
• PAUSE the machine by pressing the “Start/Pause”
button;
• press the “Skip/Reset” button repeatedly, until only
the “Drain” light remains lit;
• press the “Start/Pause” button again.
You may now select a new programme and press the
“Start/Pause” button to start it.
11. How to cancel a programme
during its cycle
To cancel a programme that is being carried out, first
pause the washing machine by pressing the
“Start/Pause” button, then press the “Skip/Reset”
button repeatedly, until the phase indicator lights go out.
Start/
Pause