Zanussi, Electrical connection environment concerns – Zanussi ZWG1140M User Manual

Page 19

Advertising
background image

19

ZANUSSI

Caution!

Water drainage

Hooked over the edge
of a sink

The inlet hose must not be lengthened. If it

is too short and you do not wish to move the tap, you
will have to purchase a new, longer hose specially
designed for this type of use.

The end of the drain hose can be positioned in three
ways:

using the

plastic hose guide
supplied with the
machine.
In this case, make sure
the end cannot come
unhooked when the
machine is emptying.

This could be done by

tying it to the tap with a piece of string or attaching it
to the wall.

In a sink drain pipe branch

Directly into a drain pipe

.

This branch must be above the trap so that the bend
is at least 60 cm above the ground.

at a height of not less than

60 cm and not more than 90 cm. The end of the drain
hose must always be ventilated , i.e. the inside
diameter of the drain pipe must be larger than the
outside diameter of the drain hose.

The drain hose must not be kinked.

Electrical connection

Environment concerns

Information on the electrical connection is given on
the rating plate on the inner edge of the appliance
door. Check that your domestic electrical installation
can take the maximum load required, also taking into

account any other appliances in use.

Connect the machine to an earthed

socket.

The manufacturer does not accept any

responsibility for damage or injury through failure

Caution!

Caution!

The symbol

on the product or on its packaging

indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product.

to comply with the above safety precaution.

Should the appliance power supply cable

need to be replaced, this MUST be carried out by
a Service Centre.

The power supply cable must be easily accessible

after installing the machine.

Caution!

For more detailed information about recycling of this
product, please contact your local council, your
household waste disposal service or the shop where
you purchased the product.

The materials marked with the symbol are recyclable.
>

<=polyethylene

>

<=polystyrene

>

<=polypropylene

Packaging materials

PE
PS
PP

>

<=paper

PAP

Advertising
This manual is related to the following products: