ZyXEL Communications WPA-1000 - Manual (Page 32)

Chapter 3 WPA-1000 Utility
WPA-1000 User’s Guide
32
Figure 10 Firewall Blocking WPA-1000
2 A login screen appears.Type the Login Code that appeared in the standby screen (see
Figure 6 on page 27 ). Then press [ENTER].
Figure 11 WPA-1000 Found: Login
3 After a successful login, the projector projects the content from your computer. The
PLAY LED blinks when your WPA-1000 is successfully projecting.
4 Control your presentation using the WPA-1000 control panel described next.
Figure 12 Utility Control Panel
The following table describes the elements in the utility control panel.
Table 5 Utility Control Panel
BUTTON DESCRIPTION
A. Play/Pause Use this button to search for available projectors and to project content
from your computer after one has been selected.
B. Stop Use this button to stop projection.
C. Refresh Use this button to refresh the screen.
D. Login Code This is the login code being used for this projection session.
E. Menus Click here to access a range of menus.
A B C
D F G E
A