Xerox 701P44148 - Manual (Page 136)

F reeFlow Scanner 665E Operator Manual 5-8
5. Job Ticket/Job Setup
– 2-Up flip right: Prints the same page twice, side
by side, on one side of a page, with the right-side image
rotated 180 degrees. You can change the paper size, if
necessary. The Orientation depends on the N-Up type you
choose. Image Shift is not available for 2-Up flip left. This
option is often selected when using offline cutting and
binding.
NOTE: If you change the paper size to a stock with the
length greater than the width, the orientation of the job is
set to landscape.
– 3-Up: Prints the same page three times, side by
side, on one side of a page. You can change the paper
size, if necessary. Image Shift is not available.
– 3-Up flip left: Prints the same page three times,
side by side, on one side of a page, with the left-side image
rotated 180 degrees. You can change the paper size, if
necessary. The Orientation depends on the N-Up type you
choose. Image Shift is not available for 3-Up flip left. This
option is often selected when using offline cutting and
binding.
– 3-Up flip right: Prints the same page three
times, side by side, on one side of a page, with the right-
side image rotated 180 degrees. You can change the
paper size, if necessary. The Orientation depends on the
N-Up type you choose. Image Shift is not available for 3-
Up flip left. This option is often selected when using offline
cutting and binding.
– 4-Up: Prints the same page four times on one side
of a page. You can change the paper size, if
necessary. The Orientation depends on the N-Up type you
choose. Image Shift is not available for N-Up.