ZyXEL Communications 2WG User Manual
Page 137
Advertising
ZyWALL 2WG Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
137
4. Network IP Address and Subnet Mask are your remote site LAN IP addresses. In this example, you
should type 192.168.1.0 on Network text box and then type 255.255.255.0 on Subnet Mask text box,
and then press OK button.
5. Click Proposals tab, on IKE(Phase1) proposal settings, select Main mode, DH Group to Group1,
Encryption to DES and Authentication to MD5. On IPsec(Phase2) proposal settings, select ESP
Protocol, Encryption to DES and Authentication to SHA1. Then, press OK button on this page.
Advertising