3 wall-mounting instructions – ZyXEL Communications P-870M-Ix v2 User Manual

Page 5

Advertising
background image

5

P-870M-Ix v2 Series User’s Guide

3 Wall-mounting Instructions

Complete the following steps to hang the P-870M-Ix v2 on a
wall.

1 Select a position free of obstructions on a sturdy wall.
2 Drill two holes for the screws (M3*10). The centers of the

holes should be 120 mm apart.

Note: Be careful to avoid damaging pipes or cables

located inside the wall when drilling holes for the
screws.

3 Do not screw the screws all the way into the wall. Leave a

small gap of about 0.5 cm between the heads of the
screws and the wall.

ETHERNET

Green

The P-870M-Ix v2 has an Ethernet
connection with a computer.

Blinking

The P-870M-Ix v2 is sending/receiving
data to /from the computer.

Off

The P-870M-Ix v2 does not have an
Ethernet connection with a computer.

DSL

Green

The P-870M-Ix v2 has a DSL connection.

Blinking

The P-870M-Ix v2 is trying to establish a
DSL connection.

Off

The DSL line is down.

Light

Status

Description

Advertising