ZyXEL Communications P-2002 - Manual (Page 93)

P-2002 Series User’s Guide
Chapter 11 Phone Usage 93
C
H A P T E R
11
Phone Usage
This chapter describes how to use a phone connected to your Prestige for basic tasks.
11.1 Dialing a Telephone Number
The VoIP/PWR LED turns orange when your SIP account is registered. Dial a SIP number
like “12345” on your phone’s keypad.
Use speed dial entries (see
Section 8.2 on page 75 ) for peer-to-peer calls or SIP numbers that
use letters. Dial the speed dial entry on your telephone’s keypad.
Use your voice service provider’s dialing plan to call regular telephone numbers.
11.2 Using Speed Dial to Dial a Telephone Number
After configuring the speed dial entry and adding it to the phonebook, press the speed dial
entry’s key combination on your phone’s keypad.
11.3 Internal Calls
Press “####” on your phone’s keypad to call the Prestige’s other phone port.
11.4 Checking the Prestige’s IP Address
Do the following to listen to the Prestige’s IP current address.
1 Pick up your phone’s receiver.
2 Press “****” on your phone’s keypad and wait for the message that says you are in the
configuration menu.
3 Press “5” followed by the # key.
4 Listen to the IP address and make a note of it.
5 Hang up the receiver.