Xerox DocuColor 40CP - Manual (Page 44)

28 Installing User Software on a Windows Computer
The TCP/IP Protocol and Microsoft TCP/IP Printing software should already be
installed on the Windows NT workstation.
T O SET UP TCP/IP AND LPR PRINTING FOR W INDOWS NT 4.0:
1. Open the Properties dialog box for the DocuColor 40 CP, and click the Ports tab.
2. Click Add Port.
The available port types are displayed.
3. Select LPR Port and click New Port.
If the LPR port is not listed, install the TCP/IP protocols. See the Configuration Guide
or your Windows NT documentation.