Zanussi FLE1015W - Manual (Page 10)

10
7. Select the spin speed or the
RINSE HOLD option
Press the SPIN SPEED button repeatedly, in order to
select the desired spin speed or the RINSE HOLD
option. The relevant light will light up.
If you select the RINSE HOLD option, the machine will
stop at the end of the programme with the water still in
the tub.
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the PREWASH option.
If you wish the laundry to undergo an extra rinse, select
the SUPER RINSE option.
If your laundry is only slightly soiled, select the QUICK
WASH option.
Press the OPTIONS button so as to cause one or two
lights to light up.
OPTIONS
PREWASH
SUPER
RINSE
QUICK
S PIN
S P EE
D
1200
900
700
500
RINSE
HOLD
9. Start the programme
Press the START/PAUSE button. The relevant light will
stop flashing, the DOOR LOCKED light will light up,
and only the light relevant to the phase that is in
progress will remain lit.
10. How to change a programme
during its cycle
Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change any phase before the programme
carries it out.
Changing the type of fabric or temperature is possible,
obviously, only during the washing phase. When you
make a change in these two parameters, the washing
machine will resume the cycle from the beginning.
If it is necessary to drain the water in order to change the
programme in progress, proceed as follows:
• PAUSE the machine by pressing the START/PAUSE
button;
• press the SKIP/RESET button repeatedly, until only
the DRAIN light remains lit;
• press the START/PAUSE button again.
When the water has been drained, a new programme can
be selected. Press the START/PAUSE button to start it.
START/PAUSE
124970992_FLE1015W.qxd 8/27/01 9:12 PM Pagina 10 (Nero/Process Black pellicola)