ZyXEL Communications G-210H - Manual (Page 9)

9
G-210H
12 Click Restart to reboot your computer and complete the
driver installation.
13 Go to section 3.4 on page 19 to set up your wireless
connection.
2 Install the Hardware
"
Do not install the hardware until you have
installed the software from the CD.
1 Locate an available USB port on the computer.
2 Remove the protective cap to expose the USB connector.
Insert the G-210H to an available USB port on the
computer. The G-210H's lights turn on if it is properly
inserted.