Xerox 877 - Manual (Page 2)

All measurements were made on products performing within established operating specifications and received
recommended maintenance procedures. Xerox certifies that this product meets or exceeds the applicable standards for
safety and emissions.
www.xerox.com Reference “About Xerox”
Product: WorkCentre Pro 412 PSDS No: 0877
FaxCentre F12
Section V - Emission/Exposure Information*
Light Source Accession Number
Light Emitting Diode Display. 9820521-23
Copy lamp is rare gas Fluorescent:
The copy lamp is safe for direct viewing
but to avoid after-glow discomfort this
should be avoided.
Class 1 Laser Product
Electromagnetic Emissions
US
FCC: Class A
Canada DOC: Class A
Audible Noise TLV
Run 57dB(A) 85.0 dB(A)
Standby 47 dB(A)
Standby (Powersave) 33 dB(A)
Impulse
59 dB(A)
Ozone
The Xerographic process does not produce measurable quantities of ozone.
ug/min TLV
None detected ppm (TWA) 0.1 ppm
Total Dust TLV
0.0075 mg/m
3
10 mg/m
3
Section VI - Product Recycling and Disposal
This product may contain lead and other materials whose disposal may be regulated due to
environmental considerations. For recycling and disposal information, contact your local authorities.
In the United States, you may also refer to the Electronic Industries Alliance web site: www.eiae.org.
For information on Xerox's worldwide equipment return and recycling programs, visit www.xerox.com
(refer to "About Xerox" section).
* TLV (Threshold Limit Value) and PEL (Permissible Exposure Level) respectively set by American
Conference of Government Industrial Hygienists and by Occupational Safety and Health Administration. These
levels are considered maximum exposure permitted to ensure no health hazard. TWA (Time-Weighted
Average) for a normal eight-hour workday.