Yamaha DVX-C310SW - Manual (Page 17)

CONNECTION
13
En
English
PRE
P
ARA
T
ION
2
■ Connecting an HDMI component
HDMI (High-Definition Multimedia Interface) is the
first industry-supported, uncompressed, all-digital
A/V (audio/video) interface.
By connecting to an HDMI component (such as a
TV), you can enjoy standard, enhanced or high-
definition video as well as multi-channel digital audio
using a single cable.
When used in combination with HDCP (High-
bandwidth Digital Content Protection), HDMI
provides a secure audio/video interface that meets the
security requirements of content providers and system
operators.
For further information on HDMI, visit the HDMI
website at “http://www.hdmi.org/”.
Viewing and Listening to playback
from an HDMI component
1 Connect HDMI output jack of this DVD receiver to the
HDMI input jack of your HDMI compatible
component using a commercially available HDMI
cable.
2 Select the appropriate audio output from [HDMI
SETUP] in [AUDIO SETUP PAGE] (see page 33).
3 Select the appropriate video output from [HDMI
SETUP] in [VIDEO SETUP PAGE] (see page 35).
– This DVD receiver is not compatible with HDCP-
incompatible HDMI or DVI components.
– You need a commercially available HDMI/DVI
conversion cable when you connect this DVD receiver to
other DVI components.
– When connecting an HDMI component, refer to the
instruction manual for the component.
– Do not disconnect or connect the HDMI cable from this
DVD receiver or turn off the power of the HDMI/DVI
component connected to the HDMI jack of this DVD
receiver while data is being transferred. Doing so may
disrupt playback or cause noise.
TV IN ANTENNA AUX IN LINE OUT TO NX-SW300
SYSTEM
CONNECTOR
DOCK
XM HDMI
GND
AM
L
R
HDMI
IN
TV
DVD receiver
Notes
01EN_DVX-C310_UC.book Page 13 Monday, July 10, 2006 11:22 AM