Zanussi ZWF 1240 W - Manual (Page 10)

10 10
Operating Sequence
Before the first wash we recommend to run a cotton
cycle at 60°C, with the machine empty, in order to
remove any manufacturing residue from the drum and
tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1.Load the laundry
Open the door by carefully pulling the door handle
outwards..
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
main wash compartment
.
If you wish to carry out the prewash, pour detergent into
the appropriate compartment marked
.
3.Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked ,
without exceeding the «MAX» mark.
Close the drawer gently.
P1195 P1194
P0004
4. Switch the machine on
Turn the selector dial to the desired programme to
switch the appliance on.
To switch the appliance off turn it to O.
5. Select the desired programme
Turn the selector dial to the desired position: the lights
corresponding to the different phases making up the
selected programme illuminate.
The duration of the programme appears in the display.
6. Select the temperature
Press the “Temp.” button if you wish to select a
temperature value different from the one proposed by
the washing machine. The relevant light will light up.
90°
60°
50°
40°
Temp.
30°
Prewash
Wash
Rinse
Spin
End
White Cottons
Coloured Cottons
Synthetics
Delicates
Handwash
Silk
Mini 30’
E-Synthetics
Wool
E-Cottons
40° AA Rinse
Drain
Spin
Delicate Spin
White Cottons
Coloured Cottons
Synthetics
Delicates
Handwash
Silk
Mini 30’
E-Synthetics
Wool
E-Cottons
40° AA Rinse
Drain
Spin
Delicate Spin