ZyXEL Communications Prestige 642R Series - Manual (Page 50)

Prestige 642R Series ADSL Router
Internet Access 3-7
Figure 3-6 Menu 1 - General Setup
3.8 TCP/IP Ethernet Setup and DHCP
You will now use Menu 3.2 to configure your Prestige for TCP/IP.
To edit Menu 3.2, enter 3 from the Main Menu to open the Menu 3 - Ethernet Setup. When Menu 3
appears, select the submenu option TCP/IP and DHCP Setup and press [ENTER]
.
The screen now displays
Menu 3.2 - TCP/IP and DHCP Ethernet Setup, as shown next :
Figure 3-7 Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Menu 1 - General Setup
System Name= P642
Location= location
Contact Person's Name= name
Route IP= Yes
Route IPX= No
Bridge= No
Press ENTER to Confirm or ESC to Cancel:
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup:
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.68.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies=
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
First address
in the IP Pool
Size of the IP
Pool
IP addresses
of the DNS
servers
This is the IP
address of the
Prestige.