Yamaha CBX-K2 - Manual (Page 24)

24
Group B function names are also shown on the panel above
the Group A function names. For the list and explanations
of Group B functions, refer to pages 28 – 29.
● Numbers – in the illustration correspond to the
operation numbers below.
Group B Operations
* Unless indicated otherwise, L refers to either of
the ENTER keys, J or K. How-
ever, when you wish to enter a decimal value, make sure
to press K. Likewise, when entering a hexadeci-
mal number, make sure to press J.
Setting the Functions
● Example: Sending a Reset All Controllers command to a sequencer or
tone generator
C + з → е
Sending a Simple Command
Operation: C + ç →
Function Key
Relevant Functions: Time Signature Top*; Time Signature
Bottom*; Poly/Mono; Reset Controll; Sound Off (all
channels); MSB/LSB Invert; Footswitch Assign*
* Repeatedly press function key to select the various
values/settings for these functions.
Setting a Simple Command (on/off)
Operation: C + ç →
Function Key
→
Value
Relevant Function: Merge On/Off (each channel)
● Example: Switching the MIDI Merge function of the CBX-K2 on or off
for MIDI channel 12
C + ç → ƒ → c (hexadecimal for
MIDI channel 12)
Keys 1 – f and 0 correspond to MIDI channel 1–
15 and 16, respectively. Pressing each key toggles the on/
off status of each channel.
9
10
SEQUENCER PROGRAM SYSTEM WHEEL ASSIGN
STOP
SONG SELECT
START TEMPO CONTINUE
MEASURE TOP BOTTOM
TIME SIGNATURE
FIXED
VELOCITY
MIDI
CH
MERGE
ON/OFF
SOUND
OFF
XG
ON
GM
ON
VOICE MAP POLY/ MONO
BANK
SELECT
PROGRAM
CHANGE
CHANNEL MERGE RESET CONTROL TG300B RESET SOUND OFF ALL CH DEVICE NUMBER TOUCH SENSITIVITY
RPN NRPN
DRUM
NUMBER CONTROLLER
RPN NRPN DATA
DENSITY
MSB 1ST/
LSB 1ST
FOOT SW
ASSIGN CONTROLLER
SLIDER ASSIGN
RPN NRPN
DRUM
NUMBER CONTROLLER
DATA
DENSITY
PB
DENSITY
RESET TRANSPOSE DISPLAY
1 2 3 4 5 B
PROGRAM
CHANGE
BANK
MSB
BANK
LSB