Zanussi ZGS 682 IC - Manual (Page 28)

28
Conversion from Natural Gas to LPG
IMPOR IMPOR IMPOR IMPOR IMPORT T T T TANT ANT ANT ANT ANT
The replacement/conversion from natural gas to LPG should only The replacement/conversion from natural gas to LPG should only The replacement/conversion from natural gas to LPG should only The replacement/conversion from natural gas to LPG should only The replacement/conversion from natural gas to LPG should only
be undertaken by a competent person.
be undertaken by a competent person. be undertaken by a competent person. be undertaken by a competent person. be undertaken by a competent person.
It is important to note that this model is designed for use with natural gas but can be
converted for use with butane or propane gas providing the correct injectors are
fitted. The gas rate is adjusted to suit.
Method Method Method Method Method
1) Ensure that the gas taps are in the 'OFF' position
2) Isolate the hob from the electricity supply
3) Remove all pan supports, burner caps, rings, crowns and control knobs.
4) With the aid of a 7mm box spanner the burner injectors can then be
unscrewed and replaced by the appropriate LPG injectors.
TO ADJUST THE GAS RA TO ADJUST THE GAS RA TO ADJUST THE GAS RA TO ADJUST THE GAS RA TO ADJUST THE GAS RATE TE TE TE TE
With the aid of a thin bladed screwdriver completely tighten down the by
pass adjustment screw. Upon completion stick the replacement rating plate
on the under side of the hob.
) ) ) ) )