Yamaha RX-V995 - Manual (Page 23)

19
English
PREPARATION
If your DVD/LD/CD combi-player has a DOLBY DIGITAL RF
signal output terminal, connect it to this unit’s
DIGITAL RF
SIGNAL input terminal. Audio signals of an LD source encoded
with the Dolby Digital are input to this unit by this connection.
* To play back an LD source with the Dolby Digital decoded,
set the input mode of DVD/LD to “AUTO” or “D.D.RF”.
(Refer to page 38 for details.)
It is also necessary to connect the DVD/LD/CD combi-player to
this unit’s analog audio signal input terminals regardless of the
DOLBY DIGITAL RF signal connection. This is for playing back
a source with Dolby Pro Logic Surround decoded or in normal
stereo (or monaural).
You must also connect the optical digital signal output terminal
of the DVD/LD/CD combi-player to the OPTICAL DVD/LD
digital signal input terminal of this unit.
This connection is necessary for playing back a DVD source
with Dolby Digital or DTS decoded, and playing back an LD
source with DTS decoded.
Note
DOLBY DIGITAL RF audio input signal cannot be recorded by
a tape deck, MD recorder or VCR. To record a source played
back on the DVD/LD/CD combi-player, it must be connected to
the OPTICAL digital audio signal input terminal and analog
audio signal input terminals of this unit.
PHONO DVD/LD
TV/DBS
IN
VCR 1
OUT
IN
VCR 2
OUT
ZONE 2
OUT
1
CD
GND
TV/DBS CD TAPE/MD
IN (PLAY) OUT (REC)
DVD/LD
EXTERNAL
DECODER
INPUT
TAPE/MD
3
4
IN
( PLAY )
OUT
( REC )
MAIN
SUB WOOFER CENTER
SURROUND
DIGITAL OUT
ANALOG OUT
DOLBY DIGITAL
RF OUT
DIGITAL SIGNAL
OPTICAL
AM
ANT
AM
FM
ANT
FM
GND
CD DVD/LD
STEP
DIGITAL
RF SIGNAL
DIGITAL
FREQUENCY
50kHz 9kHz
I00kHz I0kHz
DVD/LD/CD
combi-player
(General model)
<
For China, Singapore and General models
>