Zoom AP+4 4401A - Manual (Page 3)

5
To have the AP+4’s clock automatically updated by an NTP
server, on the Selecting a Time Zone page, select a Time
Zone and an NTP Server, and click Next.
6
In the unlikely event that you need to set up or modify your
wired local network, use the LAN Interface Setup page.
Please see the instructions in the User Guide on the AP+4
CD.
7
To connect to the Internet, select the method on the Setting
Up Internet Access page.
• The vast majority of users should select DHCP Client as
the WAN Access Type.
• If you select DHCP Client and at the end of the
installation process you have not connected successfully
to the Internet, it is possible that you are running PPPoE
software. In that case, at WAN Access Type select
PPPoE (Point-to-Point Protocol over Ethernet). Then
enter the User Name and Password given to you by
your service provider.
• If you are using the AP+4 as an Ethernet Client or a
Repeater, at WAN Access Type you should also select
DHCP Client unless you have requested a Static IP
from your Internet Service Provider.
3