The control panel, 2 “options” button, 2 “prewash” button – Zanussi ZWF 1021 W User Manual

Page 6: 3 “half load” button, 5 “start / pause” button, 6 “delay start” button, Zwf 1021w

Advertising
background image

6

1 Detergent dispenser drawer

Programme Option buttons

Depending on the programme, different functions can
be combined. These must be selected after choosing the
desired programme and before depressing the
Start/Pause button.
When these buttons are pressed, the corresponding pilot
lights come on. When they are pressed again, the pilot
lights go out.
If an incorrect option is selected, the corresponding
pilot light flashes for about 2 seconds.

2 “Options” button

By depressing this button you can select two different
options:

DAILY: to be used for lightly soiled cotton or

synthetic items in order to obtain good washing
performance in a short time.

QUICK: a very short cycle for cotton,

synthetic or delicate items that have been used or
worn for a short time.

These options cannot be used with the Economy
programme 60E and E40.

The light corresponding to the selected option
illuminates. If an option is chosen that is not allowed
with the selected programme, both lights will flash 3
times.
Max. recommended load 3.5 kg.

2 “Prewash” button

Select this option if you wish your laundry to be
prewashed before the main wash (not available for
wool, handwash and Miniprogram
).

The Control Panel

The prewash ends with a short spin in programmes for
cotton and synthetic fabrics, whereas in the programme
for delicate fabrics the water is only drained.

3 “Half Load” button

Select this button to reduce water consumption on the
rinse phase when washing a smaller load of cottons or
linens (maximum load size = 2.5 kg).
The machine will perform 2 rinses instead of 3.

This function is not available on all programmes. If
the corresponding pilot light flashes, this indicates
that this option is not available.

5 “Start / Pause” button

After having selected the required programme, press
this button to start the machine; the corresponding pilot
light stops flashing.

To interrupt a programme which is running, depress the
Start/Pause button: the corresponding pilot light starts to
flash.

To restart the programme from the point at which it was
interrupted, press the Start/Pause button again.

6 “Delay Start” button

This button makes it possible to delay the starting of the
washing programme by 12, 8, 4 and 2 hours. The delay
you have selected is indicated by the illumination of the
corresponding light. The machine begins the countdown
after depressing START/PAUSE button.
You must select this option after you have set the
programme and before you press the Start/Pause
button.
You can cancel the delay time at any moment
, before
you press the Start/Pause button.

If you have already pressed the Start/Pause button,
and you wish to cancel the delay time, proceed as
follows:

ZWF 1021 W

Washing

End

Half

Load

Spin

Start/

Pause

Delay

Start

12 H

8 H

4 H

2 H

Options

Pre-

wash

Programme

Whites Economy

Whites

Coloured Economy

Colour care

Synthetics

Synthetics

Synthetics

Delicates

Quick

95°

60°

40°

30°

60°

40°

30°

40°

Handwash

Wool

Wool Cold

Miniprogram

Rinses

Drain

Spin

Off

Daily

30°

40°

30°/30’

O

6 kg

ESSENTIAL 1000

AQUACYCLE

ESSENTIAL

1

2 3 4 5 6 7

8

9

ZWF 1021W

35.292.967….ZWF1021-1221.qxd 13/04/2005 17:57 Página 6

Advertising