Xerox 721P87481 - Manual (Page 154)

SUBMITTING PRINT JOBS FROM QUICK PRINT FOR WINDOWS NT 4.0
6-12 GUIDE TO SUBMITTING JOBS FROM THE CLIENT
Specifying which pages to print
Follow these steps:
1. From the Setup window, click the [Imaging and Job Setup] tab.
2. Enter the range of pages to print:
•
Click [All Pages] to print the entire document, or
• Type the starting page in the From text box and the last
page in the To text box.
Specifying sides to image
Follow these steps:
1. From the Setup window, click the [Imaging and Job Setup] tab.
2. Select the Sides Imaged:
• Click [1-Sided] to print the document on one side of each
page.
•
Click [2-Sided] to print the document on both sides of each
page.
• Click [Head-to-Toe] to print the document in calendar
format. Both sides of the page are printed but the position
of the image is reversed (from top to bottom) on every other
page. Head-to-Toe is also known as tumble printing.
Note: Any image shift set with the [Image Shift] option may
interfere with binding offsets set in the document file by the
application.
Positioning the image on the paper
Follow these steps:
1. From the Setup window, click the [Imaging and Job Setup] tab.
2. Alter the page shift for the front page or the front and back page
depending on the Sides Imaged selection.
Enter a number for the x and y image shifts.
Specifying finishing options
Follow these steps:
1. From the Setup window, click the [Imaging and Job Setup] tab.
2. Click the Finishing option.
Note: Finishing options listed vary by printer model.