Yamaha MDX-793 - Manual (Page 21)

21
ENGLISH
DIVIDE
This function lets you divide one track into two separate
tracks by adding a new track number to a certain point in
the track. If you add a track number at the beginning of a
section you want to hear, you can access it quickly by
using the skip function during playback. After you divide a
track, the total number of tracks increases by one and the
tracks following the divided tracks are renumbered.
1 Press # / * to play the track you want to divide.
2 Use SEARCH ! or ⁄ to locate the point
where you want to divide the track, then press # /
* to pause at that position.
3 Press EDIT repeatedly to display “Divide ?”, then
press ENTER .
“Check” appears momentarily, then “Divide OK ?” appears
and the unit starts repeating the point where the track will be
divided.
4 If necessary, use the jog dial to adjust the
position of the point where the track will be
divided.
The divide position can be adjusted up to 2 second (255
steps) in either direction.
5 Press ENTER .
The track is divided and “Complete” appears
momentarily.
To cancel before dividing the track
Press CANCEL (or &).
To undo DIVIDE
1 Press & to set this unit to stop mode.
2 Press EDIT repeatedly to display “Undo Divide”, then
press ENTER .
“Undo OK ?” appears in the display.
3 Press ENTER again to undo.
To cancel, press CANCEL (or &).
Notes
• You can also combine the tracks later using the COMBINE
function.
3 CANCEL 3,5 4
2 &
3˜8 7 REC 0EJECT POWER
0 10 0 10
RANDOM S/P REPEAT A–B DISPLAY SCROLL TITLE CHARA. DELETE EDIT SET
CANCEL ENTER
REC LEVEL PHONES LEVEL
INPUT 1 SEARCH ¡
¢ + 4 – TIMER OFF PLAY REC
NATURAL SOUND MINIDISC RECORDER MDX–793
1,2