ZyXEL Communications ZyXEL ZyAIR B-1000 - Manual (Page 62)

ZyAIR Access Point Series User’s Guide
5-12 Wireless Configuration and Roaming
Table 5-3 Roaming
LABEL DESCRIPTION
Active Select Yes from the drop-down list box to enable roaming on the ZyAIR if you have two or
more ZyAIRs on the same subnet.
All APs on the same subnet and the wireless stations must have the
same ESSID to allow roaming.
Port # Enter the port number to communicate roaming information between access points. The
port number must be the same on all access points. The default is 16290. Make sure this
port is not used by other services.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.