Xerox OS/2 WARP 4.0 User Manual

Xerox Hardware

Advertising
background image

Page 1

OS/2 Warp 4.0 (NetBEUI) Peer-to-Peer Network Quick Install Card
Xerox Document Centre 240/255/265 LP/ST

b)

On the keypad enter

1111 or the

current password. Press the

Enter

button when finished. If your printer is
an ST model press the

Go to Tools

button, otherwise skip to the next step.

c)

The Touch Screen will be used for the
remainder of the data entry.

3.

Enable Microsoft Network printing.

a)

Press the

Connectivity and Network

Setup button.

b)

At the next screen, press the

Network

Setup button.

4.

Enable the Protocol and Media

a)

At the next screen, press the
Microsoft Networking button.

b)

At the next screen, press the
Transport and Media button.

c)

At the next screen, press the

Enable

button to enable the Microsoft Network
protocols.

d)

Once enabled the Physical Media
portion of the screen will appear.
Press the corresponding button to
select one of the following,

NetBEUI/

Ethernet or NetBEUI/Token Ring.
After making your selection press

Save.

5.

Assign the Workgroup and Host Names.

a)

You will be returned to the previous
screen, press the

Workgroup and

Host button.

b)

At the next screen, press the
Workgroup Name button. Using the
touch panel keys, enter the name of
the workgroup in which you want the
printer to appear then press

Save.

c)

You will be returned to the previous
screen. Press the

SMB Host Name

button, using the touch panel keys,
enter the desired text for this item then
press

Save.

d)

OPTIONAL STEP: Press the

SMB

Host Description button, enter the
desired text then press

Save. You will

be returned to the previous screen.

e)

Press

Save again to return to the

previous screen.

Before You Start

If your printer is equipped with a Token Ring
interface, use the

Token Ring Quick Install

Card supplied in this Quick Install Card set to
set the Ring Speed and Source Routing settings
for your environment.

Record the following information

Network Interface Type ___________________

Workgroup Name _______________________

SMB Host Name ________________________

Printer Name ___________________________

OPTIONAL INFORMATION:

SMB Host Description ____________________

Printer Description _______________________

Go to the printer and...

1.

Connect your Document Centre to the
network with the appropriate cabling.

2.

Enter the

Tools pathway

a)

Press the

Access ( )button.

For assistance, contact your local Xerox Customer Support Center:
USA: 1-800-821-2797 Canada: 1-800-939-3769

Advertising