3 wall-mounting instructions – ZyXEL Communications ZyWALL 2 Plus User Manual
Page 617
Chapter 46 Product Specifications
ZyWALL 2 Plus User’s Guide
617
46.3 Wall-mounting Instructions
Complete the following steps to hang your ZyWALL on a wall.
"
See
for the size of screws to use and how far apart to
place them.
1 Select a position free of obstructions on a sturdy wall.
2 Drill two holes for the screws.
1
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the ZyWALL with the connection cables.
5 Align the holes on the back of the ZyWALL with the screws on the wall. Hang the
ZyWALL on the screws.
1 IRD +
1 OTD
+
1 IRD +
1 IRD +
2 IRD -
2 OTD - 2 IRD -
2 IRD -
3 OTD
+
3 IRD + 3 OTD +
3 OTD
+
6 OTD -
6 IRD -
6 OTD -
6 OTD -
Table 226 Ethernet Cable Pin Assignments
WAN / LAN ETHERNET CABLE PIN LAYOUT