Zanussi 132985450 - Manual (Page 11)

11
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 95°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment
of the dispenser drawer and start the
machine.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
.
If you have selected the PREWASH option, pour detergent
into the compartment marked .
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer). Close the drawer gently.
P0005 P0006
P0004
3. Switch the machine on
To switch the machine on, press the O N /O FF button: the
mains-on light comes on. The display will show three
flashing dashes or ablinking zero.
4. Select the required programme
Turn the programme selector dial to the desired
position: the display will show the duration of the
selected programme.
The lights corresponding to the different phases making
up the selected programme light on.
5. Select the SPIN speed or RINSE
HOLD option
Depress the spin speed button to choose the required
speed or RINSE HOLD option
: the corresponding
light comes on.
SPIN
SPEED
1200
900
700
500
2.05
95º
E
60º
40º
30º
60º
40º 30º 40º
30º
X
40º
COTTON
DELICATES SYNTHETICS
WOOL
60º
SPECIAL
40ºE
60ºE
30º
---
0
ON/OFF
132985450.qxd 18/07/2005 17:47 Pagina 11