ZyXEL Communications Prestige 660H Series - Manual (Page 39)

Prestige 660H and Prestige HW Series Compact Guide
39
Table 8 Firewall: Edit Rule
LABEL DESCRIPTION
Schedule
Day to Apply Select everyday or the day(s) of the week to apply the rule.
Time of Day to
Apply (24-Hour
Format)
Select All Day or enter the start and end times in the hour-minute
format to apply the rule.
Log
Log Packet
Detail
Information This field determines if a log for packets that match the rule is created
(Enable) or not (Disable). Go to the Log Settings page and select the
Access Control logs category to have the Prestige record these logs.
Alert
Send Alert
Message to
Administrator
When Matched Select the check box to have the Prestige generate an alert when the
rule is matched.
Back Click Back to return to the previous screen.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.
Delete Click Delete to remove this firewall rule and return to the Firewall Rule
Summary screen.
7 Troubleshooting
Table 9 Troubleshooting
PROBLEM CORRECTIVE ACTION
None of the LEDs
turn on when you
turn on the
Prestige. Make sure that you have the correct power adaptor connected to
the Prestige and plugged in to an appropriate power source.
Check all cable connections.
If the LEDs still do not turn on, you may have a hardware
problem. In this case, you should contact your local vendor.