Yamakawa MP-28 - Manual (Page 10)

Connections
7
Remote sensor and remote control
eye jack. Connect the remote control
eye jack to the remote sensor unit.
AUDIO OUT
VIDEO OUT
(R
e
d
, w
h
it
e
)
(Y
e
llo
w
)
FM modulator
or Amplifier
TV or Monitor
DC 12V
REMOTE OUT
R-AUDIO-L VIDEO
Power supply cable
DC 12V 1.5A Red (+), Black (-)
Red (+)
Black (-) DC 12V
Connect either
Smoke plug cable
Connect the cable to the
cogarette lighter hole
1 Refer to the owner's manual for the connected monitor as well. " "
2 Refer to the owner's manual of the connected equipment for additional information.
3 When you connect the DVD player to other equipment, be sure to turn off the power .
4 If you place the DVD near a tuner or radio, the radio broadcast sound might be distorted.
In this case, place the DVD player away from any other tuner or radio.
5 The output sound of the DVD player has a wide dynamic range. Be sure to adjust the
receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by
a sudden high output.
6 Turn off the amplifier before you connect or disconnect the DVD player's power leads.
If you leave the amplifier power on, the speakers may be damaged.
NOTE