Zenoah G800BPU-1 - Manual (Page 8)

12. Warranty
WARRANTY TERMS
1) Scope of Application
This engine manufactured by Husqvarna Zenoah Co., Ltd. (herein after “Zenoah”).
And sold to the user directly or through distributor/manufacturer, shall entitle to be
covered by this warranty.
2) Limits of Warranty
Zenoah warrants that;
1. The quality disclosed in the specifications.
2. The engine which shall be considered defective by Zenoah, caused by material or
production fault.
3) Limits of Compensation
1. Zenoah compensates such quality, material and production faults by repairing or
replacing through distributor/manufacture.
2. Zenoah shall not compensate any other accompanied or benefit losses caused to
user and distributor/manufacture by such faults and through repairing or
replacing.
4) Term of Warranty
Three (3) months after purchased by end- user subject to 12 months from produced
month.
5) Exempt from Warranty
Zenoah shall not warrant this engine even if the fault has been caused during the
period of terms of Warranty, in case that.
1. Any faults, failures caused from neglect of proper operation and maintenance
described in OWNER’S MANUAL.
2. Any modification not approved by Zenoah.
3. Normal abrasion and deterioration.
4. Consuming parts.
5. Using any parts which have not been certified by Zenoah.
6. Add-on or modified use.
1-9 Minamidai, Kawagoe-city, Saitama, 350-1165 Japan
Phone: (+81)49-243-6917 Fax: (+81)49-243-7197