Yamaha CDC-845 - Manual (Page 15)

15
To play with program data
1
2
3
If the FILE indicator is not illuminated in the display,
press the FILE/SAVE button.
4
Select the disc to be played.
Notes
● If, in step 4, the SAVE indicator does not illuminate, the disc
does not have its program data in the memory’s file.
● To stop the play of the filed program data and change to
ordinary play of the disc, press the FILE/SAVE button. By
this operation, the disc will be played in the ordinary
sequence of tracks, but the program data in the memory’s
file for that disc will not be deleted from the memory. To
once again call out the program data, follow step 3 and 4.
● In the “ALL” disc play mode, discs which have program data
in the memory’s file are played with their program data, and
others are played normally.
To delete program data from file
1
If the unit is playing a disc, press the STOP button.
*
If a program play is on standby, press the STOP
button (or the CLEAR button for
CDC-845 only)
to cancel that program setting.
2
If the FILE indicator is illuminated in the display, press
the FILE/SAVE button to turn the indicator off.
3
Select the disc of which program you want to delete.
4
5
To delete all program data from the memory’s
file
1
Turn the POWER off.
2
3
4
OPEN/CLOSE
FILE
SAVE
AUTO
DISPLAY OFF
1 2 3 4 5
DISC
1 2 3 4 5
DISC
DISC SKIP
PROG
POWER
0 FILE/SAVE
0 FILE/SAVE
FILE/
SAVE
0
FILE/
SAVE
0
(Release.)
The SAVE indicator
goes off.
(Press and hold.)
FILE/
SAVE
FILE/SAVE
FILE/
SAVE
FILE/SAVE
CDC-845 CDC-745
CDC-845 CDC-745
CDC-845 CDC-745
CDC-845 CDC-745
CDC-845 CDC-745