Zenoah G200PU - Manual (Page 15)

PROPELLER HUB REMOVAL
● Remove the propeller hub as specified below.
15
TIGHTENING TORQUE CHART
Tightening Torque
Part Screw Size N-m Kg-cm Remarks
Cylinder M4 (P0.7) 3.9 40
Sparkplug M10 (P1.0) 7.8 80 Using the tool provided
Muffler M5 (P0.8) 8.5 90
Crankcase M4 (P0.7) 3.9 40
Insulator M4 (P0.7) 3.4 35
Carburetor M5 (P0.8) 3.4 35
Sensor M4 (P0.7) 1.7 20
Stud (hub) M6 (P1.0) 9.8 100 Using a piston stopper & LOCK TIGHT
Nut (propeller) M8 (P1.25) 8.8 90 Using the tool provided
Engine mount M4 (P0.7) 2.0 20
Piston stopper
P/N: 4810-96220
Spanner provided
P/N: 8488U3000
Turn
Nut (M8xP1.25) x 2
P/N: 8488608000
Stud bolt
P/N: 848EW052Y0
M6x1.0
L=about 45
Puller (Image picture)