Scanning procedure, Scanning procedure -3, Open the image editing application – Xerox M20/M20i User Manual
Page 137: Load the originals
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Page 8-3
Scan
Scanning Procedure
Open the Image Editing Application
"
For instructions
on loading media,
refer to “Loading
Paper” on page 4-
2.
For full media
specifications
refer to “Media
Specifications” on
page 12-7.
Load the Originals
Document Feeder:
1
!
Open your image editing
application and acquire the
WorkCentre M20 TWAIN
Scanner.
This feature allows you to convert
hard copy images into electronic
images that you can use in other
documents.
3
2
Document
Guides
!
Remove all staples and paper
clips prior to loading.
!
Adjust the sliding document
guides to the size required.
!
Insert the originals neatly into the
Document Feeder, face up.
The first page should be on top
with the headings towards the
back or left of the machine.
!
Align the stack with the left and
rear edges of the tray. Adjust the
guides to just touch the edges of
the originals.