ZyXEL Communications All-in-one bedside projection clock EW103U/A - Manual (Page 6)

EN
6
2. Press +/- to select desired alarm (1 or 2).
3. Press SET ALARM to confirm.
4. Press and hold +/- to set time, then SET ALARM to
confirm. (Tip: Press and hold +/- to rapidly change
values).
/ indicates which alarm (1/2) is on.
To activate / deactivate alarm:
• Alarm 1: Press
ALARM 1 ON/OFF twice.
• Alarm 2: Press ALARM 2 ON/OFF twice.
Alarm time is displayed upon key first press.
To silence the alarm:
• Press
SNOOZE - LIGHT to silence it for 8 minutes
OR
• Press any key to turn the alarm off and activate it again
after 24 hours.
AUDIO OPTIONS
To operate radio, nature sound or play music from external
device, adaptor must be connected.
SOOTHING SOUND
To select between soothing sounds (1-3):
• Press
NATURE SOUND repeatedly.
NOTE This will automatically turn off the radio.
RADIO
To turn radio on /off: Press RADIO ON/OFF.
To select frequency:
• Press and hold
TUNE +/- to auto search or press TUNE
+/- to adjust frequency marginally.
For your convenience, the radio frequency will be stored in
memory for the next time radio is turned on.
NOTE Nature sound will automatically turn off.
MUSIC FROM EXTERNAL AUDIO DEvICE
Using a cable, plug one end to your music storage device
and one end to audio line-in socket located at the back of
unit.
NOTE
• Nature sound and radio will automatically turn off and
remain off even after line-in cable has been unplugged.
• Sleep timer function will be disabled.
To turn on radio or nature sound (while external device
is connected):
• Press
RADIO ON / OFF or NATURE SOUND.