Xerox C55/C55mp - Manual (Page 58)

4–16 T H E C O N T R O L P A N E L
DESIGNATE A TRANSPARENCY TRAY
If the optional Lower Feeder (Tray 2) is installed on your printer, you can
use the following procedures to designate Tray 1 or 2 as the transparency
tray. See “Chapter 3: Print Media.”
1. Press the On Line button located on the Control Panel. The
<ON LINE> message is cleared, and <OFF LINE> is displayed.
2. Press the Menu button, located immediately below the Message
Display Window. The <OFF LINE> message is cleared, and the Top
Menu <CONTROL MENU> is displayed.
3. Scroll through the Top Menus, using the Previous and Next buttons
until <MEDIA MENU> is displayed.
4. Press the Enter button when <MEDIA MENU> is displayed.
5. Scroll through the sub-level menu options, using the Previous and
Next buttons until <TRANSPARENCY> is displayed.
6. Press Enter when <TRANSPARENCY> is displayed.
7. Scroll to display either <TRAY 1> or <TRAY 2>.
8. Press the Enter button when the tray you want to designate as a
transparency tray is displayed.
9. Press the On Line button to put the printer back on line again.