Using the document glass, Scanning a 1 or 2-sided document, Using the document glass -14 – Xerox 665E User Manual

Page 38: Scanning a 1 or 2-sided document -14

Advertising
background image

F reeFlow Scanner 665E Getting Started

1-14

1. O verview

Using the Document Glass

Use the document glass under the following conditions:

The document is old, fragile, or torn

The document stock is lighter than 13 lb. or heavier than 32#
lb.

The document is on coated stock, inkjet paper, photographic
paper, or other rigid media

The document is larger than 11.7 x 17 inches

The document is bound

NOTE: Scan fragile documents, photographs (printed on
photographic stock), inkjet papers, and bound documents on the
Document Glass.

Scanning a 1 or 2-sided document

To scan a 1 or 2-sided document:

1.

Raise the document glass cover.

2.

Place the document on the document glass, registering it in
the upper left corner.

3.

Close the document glass cover.

4.

Make the desired selections from the Scan and Print
application.

The Scan and Print application is discussed in Chapter 3 on
page 3-1.

5.

If desired, make additional selections from Advanced
Scanning.

The Advanced Scanning application is discussed in the
online Help and in the FreeFlow Scanner 665E Operator
Manual.

NOTE: If scanning a 2-sided document, be sure to select the
2-sided option from Scan and Print/Advanced Scanning.

6.

When satisfied with settings, click Scan (from Scan and
Print/Advanced Scanning).

NOTE: If scanning a 2-sided document, turn the document
over and repeat steps Step 4 t
hrough Step 6 for the second
side.

Advertising