Yamaha R-V902 - Manual (Page 37)

37
REMOTE CONTROL
TRANSMITTER
TAPE
CD
TUNER
VCR
DVD/LD
V-AUX
PHONO
TV/DBS
TV
VCR
OFF
SYSTEM
POWER
MASTER
VOLUME
OPERATION
CONTROL
EFFECT
TRANSMIT
MACRO
QUICK
OFF
SLOW
TAPE
A
CD
TUNER
VCR
B
DVD/LD
V-AUX
PHONO
EFFECT
ON/OFF
TV/DBS
C
DIR
TRANSMIT
/LEARN
LEARN CLEAR MACRO
PRESET A/B/C/D/E
PRO LOGIC ENHANCED
1 2 3
MOVIE STADIUM DISCO
MONO
VIDEO
CONCERT
4 5 6
ROCK
7 8 9
HALL
TIME/LEVEL
DELAY
CENTER
REAR
SWFR
TEST
SLEEP 2CH/6CH
MASTER VOLUME
TV
VCR
OFF
SYSTEM
POWER
0
+10
REMOTE CONTROL
TRANSMITTER
DISC STOP
A/B REC/PAUSE
B A
1
2
Preset macro keys
MACRO OPERATIONS (When the lid is closed)
“Macro” is a command which defines a sequence of several
operations.
The keys shown in the illustrations below (as preset macro
keys) are also preset with macros, in addition to individual
functions.
Each macro key is preset so that simply pressing it alone will
carry out several functions of other keys on this remote control
transmitter sequentially. (To know what key functions are
sequentially carried out by pressing each preset macro key,
see the next page.)
Macros can be used only when the lid is closed and the
MACRO switch is set to “SLOW” or “QUICK”. (If “OFF” is
selected, no macro will function even if the lid is closed.)
Preset macro keys are originally preset with macros. If you
prefer, however, you can change the contents of a macro key
by storing a desired series of functions on it. You can store up
to seven functions onto a macro key. (See page 40 for the
learning method.)
Setting the MACRO switch
OFF:
In this position, no macro will function even if the lid of
remote control transmitter is closed.
QUICK: In this position, when a macro key is pressed, each
command is transmitted at 0.5 second intervals.
SLOW: In this position, when a macro key is pressed, each
command is transmitted at 3 second intervals.
Lid is closed.
(Set the MACRO switch to
“QUICK” or “SLOW”.)
MACRO switch