Troubleshooting (faq), Playback response is delayed, Cannot suspend or resume the computer correctly – Yamaha UX256 User Manual

Page 31: How can i remove or re-install the driver, Restart the computer, Re-start the computer, Wish to use the ux256 in midi-supported games, Double-click “multimedia” in the control panel, Wish to use the ux256 with a windows nt machine

Advertising
background image

31

Troubleshooting (FAQ)

■ Playback response is delayed.

• Does your computer satisfy the system requirements? (page 8)
• Is any other application or device driver running?
• [Macintosh]

→

Turn off virtual memory.

→

Disable AppleTalk.

■ Cannot suspend or resume the computer correctly.

• Do not suspend the computer while the MIDI application is running.

■ How can I remove or re-install the driver?

• [Windows 98]

1. When the UX256 is recognized correctly, double-click “System” in the Con-

trol Panel to open the System window.

2. Double-click the “Device Manager” tab, select “YAMAHA USB MIDI

Driver” and remove it.

3. Use MS-DOS prompt or Explorer to remove the following three files.

To delete the files from Explorer, from the [File] menu, select
[View | Folder Options], then select “Show all files.”

\WINDOWS\INF\OTHER\YAMAHAYMIDUSB.INF
\WINDOWS\SYSTEM\Xgusb.drv
\WINDOWS\SYSTEM\Ymidusb.sys

4. Turn off the power to the UX256 and remove the USB cable.
5. Restart the computer.
6. Re-install the driver according to the instructions on page 14.

• [Macintosh]

1. Delete the files in the following locations:

System Folder | Control Panels | YAMAHA USB MIDI Patch
System Folder | Extensions | USB YAMAHA MIDI Driver
System Folder | OMS Folder | YAMAHA USB MIDI OMS Driver

2. Re-start the computer.
3. Install the driver (page 18) and set up OMS (page 20).

■ Wish to use the UX256 in MIDI-supported games.

• [Windows 98]

1. Double-click

“Multimedia” in the Control Panel.

2. Click the “MIDI” tab and select the driver according to the port number of

the connected tone generator. (page 17)

■ Wish to use the UX256 with a Windows NT machine

• Windows NT 3.x or 4.0 does not support USB.

NOTE

Advertising