Yamaha HTR-5140 - Manual (Page 11)

11
English
1
Multi-information display
This displays various information, for example the station
frequency, preset station number and name of the selected
program source.
2
MEMORY indicator
When MEMORY is pressed, this indicator flashes for about five
seconds. During this period, the displayed station can be
stored in the memory.
3
AUTO TUNING indicator
This lights up when the unit is in the automatic tuning mode.
4
TAPE/MD MON indicator
This lights up when the tape deck (or MD recorder, etc.) is
selected as the program source by pressing TAPE/MD MON /
EXT. DECODER on the front panel or TAPE/MD on the remote
control transmitter.
5
STEREO indicator
This lights up when an FM stereo broadcast with sufficient
signal strength is being received.
DISPLAY PANEL
6
Signal-level meter
This indicates the signal level of the station being received.
If multipath interference is detected, the indication decreases.
7
, and indicators
“ ” lights up when the built-in Dolby Digital decoder is
on and the signal of the selected source encoded in Dolby
Digital sound is not in 2-channel. “
” lights up when the
built-in digital sound field processor is on, and “ ”
lights up when the built-in Dolby Pro Logic Surround decoder is
on. Depending on the selected DSP program, both “
”
and “ ”, or both “ ” and “ ” will light up.
8
SLEEP indicator
This lights up while the built-in SLEEP timer is functioning.
05HTR-5140-e/f-1 6/22/99, 2:04 PM 11