ZyXEL Communications P-2900-4HB User Manual
Page 110
Appendix B Setting up Your Computer’s IP Address
P-2900-4HB User’s Guide
110
2
Double-click on the profile of the network card you wish to configure. The
Ethernet Device General screen displays as shown.
Figure 48 Red Hat 9.0: KDE: Ethernet Device: General
• If you have a dynamic IP address click Automatically obtain IP address
settings with and select dhcp from the drop down list.
• If you have a static IP address click Statically set IP Addresses and fill in
the Address, Subnet mask, and Default Gateway Address fields.
3
Click OK to save the changes and close the Ethernet Device General screen.
4
If you know your DNS server IP address(es), click the DNS tab in the Network
Configuration screen. Enter the DNS server information in the fields provided.
Figure 49 Red Hat 9.0: KDE: Network Configuration: DNS
5
Click the Devices tab.