Zenith DXG-210 - Manual (Page 11)

21 20
All options will be available when NTSC video
is connected.
Select OK to save your changes and exit, or
select Cancel to exit without saving your
changes. Selecting Default restores factory
settings.
6.3.2 Zoom/Focus adjustments
Zoom and focus adjustments
To adjust focus, turn the outer part of the
lens (1). To adjust zoom, turn the inner
part of the lens (2).
6.3.3 Color manager
Color tone settings
The color manager is designed to give you
optimal performance from your projector, inde-
pendent of ambient lighting conditions.
In the color manager menu you can choose
between four pre-defined Color settings.
6.3.4 Picture positioning
Picture positioning
Adjust vertical and horizontal position of the
picture on the screen with the two sliders.
Select OK to save your changes and exit, or
select Cancel to exit without saving your
changes.
CH AN FOCU S ZO OM S-V V TV PC
1
2
6.3 Control panel menu
Control panel menu when PC is selected
In the control panel you have access to menus
for adjusting picture settings.
The icons “Picture positioning” and
“Synchronization Adjustments” are only visible
if PC source is active.
6.3.1 Picture control
Select the picture control menu for
adjusting brightness, contrast, saturation and
tint.
When PC is selected as source and auto
contrast is marked, only brightness will be
available.
When PAL/SECAM video is connected
brightness, contrast and saturation will be
available.
When PC is selected as source, only brightness
and contrast will be available.