Xerox 8400 User Manual
User safety
Phaser® 8400 Color Printer
Copyright © 2003 Xerox Corporation. All Rights Reserved.
A-1
Your printer and the recommended supplies have been designed and tested to meet strict safety
requirements. Attention to the following information will ensure the continued safe operation
of your printer.
Electrical Safety
■
Use the power cord supplied with your printer.
■
Plug the power cord directly into a properly grounded electrical outlet. If you do not know
if an outlet is grounded, ask an electrician to check the outlet.
■
Do not use a ground adapter plug to connect the printer to an electrical outlet that does not
have a ground connection terminal.
■
Do not use an extension cord or power strip.
Warning
Avoid the potential of electrical shock by ensuring that the printer is properly grounded.
Electrical products may be hazardous if misused.
■
Do not place the printer in an area where people might step on the power cord.
■
Do not place objects on the power cord.
■
Do not block the ventilation openings. These openings are provided to prevent overheating
of the printer.
■
Do not drop paper clips or staples into the printer.
Warning
Do not push objects into slots or openings on the printer. Making contact with a voltage
point or shorting out a part could result in fire or electrical shock.
User Safety