Engine cooling air intake, Throttle cable, Choke cable – Yazoo/Kees ZELKH61250 User Manual

Page 40: Maintenance

Advertising
background image

English

-

40

MAINTENANCE

Engine Cooling Air Intake

Check that the engine’s cooling air intake is free from

leaves, grass, and dirt.
If the cooling air intake is clogged, engine cooling

deteriorates, which can lead to engine damage.
The cooling air intakes rotates when the engine is

running. Mind your fingers.

Throttle Cable

Check that the engine responds to throttle increases

and that a good engine speed is attained at full

throttle.
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made as

follows for the lower cable:
1. Loosen the clamping screw for the cable’s outer

casing and move the throttle to the full throttle

position.

2. Check that the throttle cable is mounted in the

correct hole in the lower lever, see illustration.

3. Push the throttle cable’s outer casing as far to the

right as possible and tighten the clamping screw.

Choke Cable

If the engine produces black smoke or is difficult

to start, this can be because the choke cable is

incorrectly adjusted (upper cable).
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made as

follows:
1. Loosen the clamping screw for the cable’s outer

casing and push the choke control fully in.

2. Check that the choke cable is mounted in the

upper lever, see illustration. Push the choke cable’s

outer casing as far to the left as possible and

tighten the clamping screw.

8061-014

Check and clean the cooling air intake

8011-605

Adjusting the throttle cable

Adjusting the choke cable

8011-605

Advertising
This manual is related to the following products: