Yamakawa DVD-MP12i - Manual (Page 13)

Turning the power on and off
Even if you turn power off or switch the ignition
Key to OFF during playback or change the video
source, playback will continue from the point
where playback stopped when the power is
turned ON again.
The play position memory is released if the disc
is removed or the Reset switch is pressed.
Play Position Memory Function
Press POWER button
1
The power turns on.
To turn the power off, Press POWER
button again.
2
Connect
AV SEL
Using AUDIO and
VIDEO OUT,
connect the monitor
or audio system
Using AUDIO and VIDEO IN,
connect the DVD video player
to a VTR, TV/VTR combination
or video selector
AUX Video Input
INTERNAL VIDEO
10
Switching between External and Internal Video
Turning the power on and off
Adjusting the volume
Adjusting the volume
3
Press the + button to increase the volume.
Press the - button to decrease the volume.
Switching between DVD
and AUX Video Input
To switch between DVD and AUX Video input,
press the AV SEL on the remote control.
AV SEL
AV SEL AV SEL