Zebra Technologies 160S - Manual (Page 67)

Printhead and Platen Roller
Inconsistent print quality, such as voids in the bar code or graphics, may
indicate a dirty printhead. For optimum performance, Zebra recom-
mends performing the cleaning procedure on page 6-3 after every roll
of ribbon (after every roll of media, for direct thermal printing).
Note: Label Available Sensors are shown for location purposes only.
They are not standard on all printers.
6-2 Zebra S-Series User’s Guide
Figure 6.1 Printhead Cleaning (105Se shown)
66