Zenoah BC3500DWM - Manual (Page 2)

GB-2
BC3500DLM / BC3500DWM
DESIGNATION : Brushcutter
MANUFACTURER : Husqvarna Zenoah Co., Ltd.
MODELS : BC3500DLM BC3500DWM
SERIAL NUMBERS DATING : 2010 and onwards
(The year is cleary stated on the rating plate,
follwed by the serial number)
This declaration conform with :
DIRECTIVE 2006/42/EC
(The following standards have been applied: ISO 12100-1,-2, FprEN 15503: 2009)
DIRECTIVE
2004/108/EC
(The following standards have been applied: EN 61000-6-1, EN 55012 (CISPR 12: 2005))
DIRECTIVE
2000/14/EC
conformity assessment procedure followed ANNEX V
DIRECTIVE
2002/88/EC
DIRECTIVE 2002/44/EC
Date : 29 December 2009
Signature :
Kiyoshi Honda
General Manager, Development Center
Authorised representative :
Husqvarna AB
SE-561 82 Huskvarna, Sweden
Person authorised to compile the technical file :
Bo R Jonsson
SE-561 82 Huskvarna, Sweden
EC DECLARATION OF CONFORMITY
(Applies to Europe only)
The undersigned manufacturer,
Husqvarna Zenoah Co.,Ltd.,
1-9, Minamidai, Kawagoe, Saitama, Japan,
declares under sole responsibility that the following products referred to in this
declaration conform with the requirement of the following COUNCIL’S DIRECTIVE.
The products referred to are :